There can be instances when Bethesda house owners may need to turn off their hot water heater speedily, and it will be important that ones has learned the correct methods in doing so. Haynes Plumbing is here to be your 24 hr Plumbing Bethesda company to go to as required.

24 Hour Plumber Bethesda – Emergency Water Heater Shut Off

1. First turn off the Electricity or Gas

Gas – The thermostat dial is required to be switched from the “on” to the “off” position. This will turn off the gas at the water heater. If the smell of gas is ever discovered, leave the household and make contact with the local gas company without delay.

Electric – Find the breaker box location and shut off the breaker for the water heater. One could have a detach switch close to the water heater. Utilize this to switch off the switch to turn off power to the water heater.

2. Shut Off the Water Supply24 hr Plumbing Bethesda

Find the cold water pipe hooked up to the water heater and trace it back to the origin or the wall. If it is an old style turn faucet handle, twist it clockwise until it stops. This should turn off the water.
If you have a more recent lever design ball valve pull or press the handle a quarter turn. This should shut off the water.

3. Open the Pressure Relief Valve

This is also sometimes known as the T&P valve. Opening this will relieve the pressure in the water storage tank. A little water will come out of this whenever it is opened that may be hot so be careful! Lift up the lever so it is sticking straight out or up.

4. Drain the Water Heater

It could be necessary for the water heater to be drained of its water (this is optional). First, a yard hose must be hooked up to the drain valve positioned towards the bottom part of the water heater. Run the hose outside the house. Always remember that the water being released of the hot water heater may have rust in it which could trigger harm to yard and plants, and will be hot. Within the household, open the hot side faucet in the sink closest to the water heater. It will discharge the vacuum seal and permit the water drain out of the water heater better. It should take anywhere from 10-30 minutes for the water heater to drain.

These are essential plumbing emergency measures that we hope you will keep in mind when having to face a Bethesda water heater emergency repair.

Check out our information on water heater troubleshooting and general emergency plumber services.